FS: 02 WRX EBC rear rotors and OEM pads

Storm · 07-03-2010, 12:10 PM

I've got a set of NEW EBC drilled rear rotors and stock pads that surprisingly don't fit my setup. There's a small amount of surface rust in spots due to handling them with bare hands, but nothing that won't clean up. Pads are still wrapped in plastic. Here's a pic...

I'm asking $80 shipped or deal of the century $120 INSTALLED.

Huffer · 07-03-2010, 11:14 PM

Are these the same size rotor as the "H6" Legacy? 11.3" disc, solid.

My rear brakes are shot, so I was going to upgrade to the bigger rear rotors with new caliper brackets, pads and rotors.

Storm · 07-05-2010, 01:27 PM

Could be.....They're just shy of 11.5" in diameter. I can get an accurate measurement later if needed.

Huffer · 07-06-2010, 05:41 PM

Yeah, let me know - I wonder if the pads will fit my calipers too - then all I'd need is the H6 bracket. My car's on jacks right now, maybe you can drop by my place one evening and I can test fit?

Storm · 07-07-2010, 12:27 PM

I have zero time to chase down parts. I'll measure the rotors to the 'enth degree and cut the plastic on the pads to show the shape. Aside from that, You'll have to research some of it on your own.

Huffer · 07-07-2010, 05:58 PM

Hey no worries jay! I'm pretty sure that they'll fit, I just want to make sure that they're the bigger rotor not the smaller size. If you have the parts at home I'm happy to grab them one evening, test the fit out and bring them right back if no go?

Storm · 07-07-2010, 06:24 PM

Here's a pic I snapped today as I was passing through the shop.

Huffer · 07-08-2010, 03:24 PM

Hmm... ok this is odd.

Cars101.com tells me the 2002 WRX had a 10.3" rear solid rotor, and the 2004 Legacy "H6" has an 11.3" rear solid rotor. Based on that, the rotor you have should be 10.3... but your tape measure says 11.3".

Well, it looks like they fit, and the pads should too, so put me down for the parts. Let me know when you've brought them back from the shop.

Storm · 07-08-2010, 04:19 PM

I will bring them back tonight or sunday night. I won't be around this weekend.

Storm · 07-14-2010, 08:09 AM

SOLD!

Huffer · 07-15-2010, 02:46 PM

LOL, I still gotta pay you man! I forgot my ATM card again today...but I dropped half of the money to Deb today. Will get you the other half by next week.

Huffer · 07-27-2010, 01:22 PM

Hey Jay, here's what I did with them:
2004 Legacy GT calipers + brackets + stock pads + the EBC rotors:

Storm · 07-28-2010, 06:49 AM

Cool. Glad they have a new home and are getting used.

07-03-2010, 12:10 PM	#1
Storm Senior Member Join Date: Oct 2009 Location: Willoughby Posts: 198	FS: 02 WRX EBC rear rotors and OEM pads I've got a set of NEW EBC drilled rear rotors and stock pads that surprisingly don't fit my setup. There's a small amount of surface rust in spots due to handling them with bare hands, but nothing that won't clean up. Pads are still wrapped in plastic. Here's a pic... I'm asking $80 shipped or deal of the century $120 INSTALLED. __________________ Jay Storm Last edited by Storm; 07-03-2010 at 01:58 PM.

07-03-2010, 11:14 PM	#2
Huffer Senior Member Join Date: Oct 2009 Location: Eastlake, OH / Wellington, NZ Posts: 258	Are these the same size rotor as the "H6" Legacy? 11.3" disc, solid. My rear brakes are shot, so I was going to upgrade to the bigger rear rotors with new caliper brackets, pads and rotors. __________________ - Roger USDM 98 Legacy GT 5MT waggy - Panda'd out

07-05-2010, 01:27 PM	#3
Storm Senior Member Join Date: Oct 2009 Location: Willoughby Posts: 198	Could be.....They're just shy of 11.5" in diameter. I can get an accurate measurement later if needed. __________________ Jay Storm

07-06-2010, 05:41 PM	#4
Huffer Senior Member Join Date: Oct 2009 Location: Eastlake, OH / Wellington, NZ Posts: 258	Yeah, let me know - I wonder if the pads will fit my calipers too - then all I'd need is the H6 bracket. My car's on jacks right now, maybe you can drop by my place one evening and I can test fit? __________________ - Roger USDM 98 Legacy GT 5MT waggy - Panda'd out

07-07-2010, 12:27 PM	#5
Storm Senior Member Join Date: Oct 2009 Location: Willoughby Posts: 198	I have zero time to chase down parts. I'll measure the rotors to the 'enth degree and cut the plastic on the pads to show the shape. Aside from that, You'll have to research some of it on your own. __________________ Jay Storm

07-07-2010, 05:58 PM	#6
Huffer Senior Member Join Date: Oct 2009 Location: Eastlake, OH / Wellington, NZ Posts: 258	Hey no worries jay! I'm pretty sure that they'll fit, I just want to make sure that they're the bigger rotor not the smaller size. If you have the parts at home I'm happy to grab them one evening, test the fit out and bring them right back if no go? __________________ - Roger USDM 98 Legacy GT 5MT waggy - Panda'd out

07-07-2010, 06:24 PM	#7
Storm Senior Member Join Date: Oct 2009 Location: Willoughby Posts: 198	Here's a pic I snapped today as I was passing through the shop. __________________ Jay Storm

07-08-2010, 03:24 PM	#8
Huffer Senior Member Join Date: Oct 2009 Location: Eastlake, OH / Wellington, NZ Posts: 258	Hmm... ok this is odd. Cars101.com tells me the 2002 WRX had a 10.3" rear solid rotor, and the 2004 Legacy "H6" has an 11.3" rear solid rotor. Based on that, the rotor you have should be 10.3... but your tape measure says 11.3". Well, it looks like they fit, and the pads should too, so put me down for the parts. Let me know when you've brought them back from the shop. __________________ - Roger USDM 98 Legacy GT 5MT waggy - Panda'd out

07-08-2010, 04:19 PM	#9
Storm Senior Member Join Date: Oct 2009 Location: Willoughby Posts: 198	I will bring them back tonight or sunday night. I won't be around this weekend. __________________ Jay Storm

07-14-2010, 08:09 AM	#10
Storm Senior Member Join Date: Oct 2009 Location: Willoughby Posts: 198	SOLD! __________________ Jay Storm

07-15-2010, 02:46 PM	#11
Huffer Senior Member Join Date: Oct 2009 Location: Eastlake, OH / Wellington, NZ Posts: 258	LOL, I still gotta pay you man! I forgot my ATM card again today...but I dropped half of the money to Deb today. Will get you the other half by next week. __________________ - Roger USDM 98 Legacy GT 5MT waggy - Panda'd out

07-27-2010, 01:22 PM	#12
Huffer Senior Member Join Date: Oct 2009 Location: Eastlake, OH / Wellington, NZ Posts: 258	Hey Jay, here's what I did with them: 2004 Legacy GT calipers + brackets + stock pads + the EBC rotors: __________________ - Roger USDM 98 Legacy GT 5MT waggy - Panda'd out

07-28-2010, 06:49 AM	#13
Storm Senior Member Join Date: Oct 2009 Location: Willoughby Posts: 198	Cool. Glad they have a new home and are getting used. __________________ Jay Storm

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode